This driver supports and has been tested 
with the ATI Graph Wonder XL24.



DRIVER INSTALLATION PROCEDURE

     

      Log on the workstation as an administrator or with an account
      which has administrator privileges on the workstation.

      From the MAIN group in the Program Manager window, start the
      "Control Panel" program.

      Start the "Display" control panel applet program. 

      If the driver has never been installed on the system, select
      the button labeled "Change Display Type...".  From the "Display Type"
      dialog box, select the "Change..." button.  From the "Select Device"
      dialog box, select the "Other..." button. 

      At this point, specify the path to the new driver and press the <ENTER> key.

      From the "Select Device" dialog box, select the resolution you would like.
      Select the "Install" button.
      Windows NT Setup will copy the miniport driver and the
      display driver to the proper directories on your system.

      The "Windows NT Setup" program will display a dialog box asking you
      to enter the path where the actual files exist.  Enter the
      same path and press the <ENTER> key:

	  Example:  a:\

      If you are instead prompted with a question to use 'Current' or 'New'
      drivers, select 'New', then enter the path.

      Reboot the system after exiting the "Windows NT Setup" program.

      After the system is rebooted, you will be able to go back into the
      Control Panel Display applet and select and test an alternate
      screen resolution.
